Table des Matières
Publicité
Installing
Installation Method
Assembling the wall-mount metals
■ Assemble the wall-mount metal (Top),
(Center) and (Bottom) with 4 M6 x 18
screws.
CAUTION
■ Do not install in
locations where
there is excessive
vibration or impact.
Injury and damage
could result from
falling.
WARNING
■ Use the specified
bolts and screws in
the specified places
and tighten firmly.
Failure to do this could
cause injury if the
plasma TV falls.
■ Do not alter any of
the parts. And do
not use broken
parts.
This could result in
injury due to the
plasma TV falling.
Wall-mount metal
(center)
– 4 –
■ Do not install where
there is direct
sunlight and other
strong light.
Strong light could result
in eye fatigue during
usage.
■ Make sure the TV-
mount metals and
wall-mount metals
are firmly engaged.
Failure to do so could
cause the plasma TV
to fall.
■ Always use at least
two people to
perform the
installation work.
Injury could result from
dropping heavy
objects.
■ Use care to prevent
the fingers being
caught.
M6 x 18 screw x 4
cutout
Wall-mount metal
(top)
Wall-mount metal
(bottom)
Publicité
Table des Matières
