Switching The Hands-Free Appliance On And Off; Coupling The Hands-Free Appliance With A Mobile - SilverCrest SBTF 10 C2 Mode D'emploi

Masquer les pouces Voir aussi pour SBTF 10 C2:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Switching the hands-free
appliance on and off
Switching on: The appliance is switched off .
Press and hold the multi-function button 6 for 3 seconds,
until a short and high signal tone is heard. The LED
status indicator 7 blinks twice every 3 seconds.
Switching off : The appliance is in standby mode.
Press and hold the multi-function button 6 for 5 seconds,
until a long and deep signal tone is heard. The LED
status indicator 7 extinguishes.
Coupling the hands-free appliance
with a mobile telephone
The hands-free appliance has been especially developed
for mobile telephones that support the Bluetooth
"Handsfree (HFP) and Headset (HSP)". Further informa-
tion about Bluetooth
the operating instructions for your mobile telephone.
Before you can use the hands-free appliance, you must
connect it with a compatible mobile telephone (pairing).
Check to make sure the mobile telephone is switched on.
Programme the mobile telephone so that it searches
for Bluetooth
how to do this is to be found in the operating instruc-
tions for your mobile telephone.
Ensure that the hands-free appliance is correctly set up
and switched off .
To switch the device off , press and hold the multi-function
button 6 for about 3 seconds. A long, low signal
tone will be heard and the LED status indicator 7
extinguishes.
Position the hands-free appliance and the mobile tele-
phone so that they are not more than 1 metre away
from each other.
Press and hold down the multi-function button 6 for 6
seconds until, after 3 seconds a short, high signal tone
SBTF 10 C2
®
radio technology is to be found in
®
appliances. A detailed description of
GB
®
Profi le
41

Publicité

Table des Matières
loading

Table des Matières