Cleaning The Front Wheel; Cleaning The Sensors; Changing The Batteries In The Remote Control; Replacing The Rechargeable Battery - Miele HS17 Mode D'emploi

en
 Attach the new seal to the side and
clip it into position.
 Replace the dust box in the robot va‐
cuum cleaner, making sure it clicks
into position.

Cleaning the front wheel

 Place the robot vacuum cleaner upsi‐
de down on a level, clean surface.
Do not lift the robot vacuum cleaner
by the area around the dust box as it
can come loose.
 Unclip the cover.
 Remove the front wheel.
 Remove any threads and hairs and
clean the front wheel with the brush
end of the cleaning brush.
 Replace the front wheel and close the
cover making sure it clicks into positi‐
on.

Cleaning the sensors

52
 Carefully clean the sensors on the si‐
de and the bottom of the robot vacu‐
um cleaner using a dry cotton wool
bud.
Changing the batteries in the remote
control
The remote control requires two 1.5 V
(AAA) batteries.
 Remove the battery compartment co‐
ver.
 Replace the batteries making sure
the polarity is correct.

Replacing the rechargeable battery

Keep a spare original Miele lithium-ion
rechargeable battery to hand for your
Scout RX1.
 Place the robot vacuum cleaner upsi‐
de down on a level, clean surface.
Do not lift the robot vacuum cleaner
by the area around the dust box as it
can come loose.
 Unscrew the cover of the recharge‐
able battery compartment on both si‐
des with a cross-headed screwdriver.