Table Des Matières - Panasonic Technics Grand Class SU-G30 Manuel D'utilisation

01 Standby/on switch (
• Press to switch the unit from on to standby mode or vice versa. In
standby mode, the unit is still consuming a small amount of power.
02 Power indicator
• Blue: The unit is on.
• Red: The unit is in standby mode with the following status.
- Network standby function is available. ( 39)
- Charging an iPhone/iPad/iPod ( 31)
• Off: The unit is in standby mode with no function available.
03 Remote control signal sensor
• Distance: Within approx. 7 m (23 ft) directly in front
• Angle: Approx. 30° left and right
04 Headphones jack
• When a plug is connected, the speakers do not output sound.
• Excessive sound pressure from earphones and headphones can
cause hearing loss.
• Listening at full volume for long periods may damage the user's
ears.
05 USB-A terminal ( DC 5 V 2.1 A)
• Port for iPhone/iPad/iPod and USB devices ( 30, 31)
06 Volume knob
• -- dB (min), -99.0 dB to 0 dB (max)
• When this unit is muted, if you turn the knob, the muting will be
cancelled.
07 Display
• Input source, playback status, etc. are displayed. For details, visit:
www.technics.com/support/
08 Input selector knob
• Turn this knob clockwise or anticlockwise to switch the input
source.
09 Analog audio input terminals (PHONO) ( 36)
• MM cartridges are supported.
10 PHONO EARTH terminal ( 36)
• For connecting the ground wire of a record player.
11 Analog audio input terminals (LINE IN) ( 36)
12 Optical digital input terminal ( 34)
13 Coaxial digital input terminals ( 34)
14 USB-B terminal
• For connecting to a PC, etc. ( 35)
15 LAN terminal ( 18)
16 Speaker output terminals ( 16)
17 Product identification marking
• The model number is indicated.
18 AC IN terminal ( ) ( 17)
19 Wireless LAN antenna ( 19)
)
Control reference guide
13
(13)