Working Advice; Maintenance And Service; Maintenance And Cleaning; After-Sales Service And Application Service - Bosch Cutter Notice Originale

Masquer les pouces Voir aussi pour Cutter:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 23
OBJ_BUCH-2057-004.book Page 20 Wednesday, March 2, 2016 3:35 PM
20 | English

Working Advice

 Do not strain the machine so heavily that it comes to a standstill.
The cutting performance of the machine depends on the materials to be
cut and on the charging condition of the battery.
Depending on the charge condition of the battery, excessive feed consid-
erably reduces the performance capability.
Always keep the blade free and clean of material remainders.
The guide edge 2 may not become wedged during cutting and must be
aligned parallel to the cutting surface.
Improper use of the blade will cause it to become blunt.
Thin materials, such as fabrics, can be pulled into the machine during cut-
ting and become wedged. Therefore, do not apply too much pressure with
such materials in order to achieve good cutting results. During cutting, ap-
ply sufficient tension while holding fabrics and cut slowly.
Optimum cutting results are best determined through practical testing.

Maintenance and Service

Maintenance and Cleaning

 Keep the cutting adapter clean to ensure good, safe operation.
 Remove the cutting adapter from the screwdriver to clean it. There
is danger of injury when unintentionally actuating the On/Off switch.
 Be careful when cleaning the blade and counterblade. The blades
have sharp edges which you can injure yourself on.
While cutting, material residue can accumulate under the blade guard.
– Clean the blade guard 3 regularly with a brush.

After-sales Service and Application Service

In all correspondence and spare parts orders, please always include the
10-digit article number given on the type plate of the cutting adapter.
Our after-sales service responds to your questions concerning mainte-
nance and repair of your product as well as spare parts. Exploded views
and information on spare parts can also be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions concerning
our products and their accessories.
1 609 92A 1NB | (2.3.16)
Bosch Power Tools

Publicité

Table des Matières
loading

Table des Matières