Wall Installation - Sony AN-820A Mode D'emploi

Wall installation

1
2
M3 screws (supplied)
1) For details, refer to the Operating Instructions for the corresponding device.
2) Use a 50-ohm cable (at least RG-212/U).
6 Installation
Wood screw
(supplied)
2)
Coaxial cable
Hangers
to the BNC
connector
M3 screw
Antenna seat
Screw to the wall.
Attachment B (supplied)
Attachment B screwed
to the wall
Coaxial cable
Attachment A (supplied)
Connect to the ANTENNA A/B IN (DC
OUT) connector on either of the following
devices:
• Wireless microphone tuner
1)
• Tuner base unit
1)
• Antenna divider
1)
• Powered mixer
2)
1)