Inserting Batteries In The Remote Control; Connecting The Antenna - Medion Life X14020 Guide De Démarrage Rapide

MD31380 / MD31381 / MD31382 / MD31420:
MD31424:

3.3. Inserting batteries in the remote control

 Loose the screw of the battery compartment cover on the back of the remote control and
remove the cover.
 Insert two LR03 (AAA) 1.5 V batteries in the battery compartment of the remote control. Check
the battery polarity (inscribed on the bottom of the battery compartment).
 Close the battery compartment by fixing the cover with the screw.
NOTICE!
Risk of damage!
The remote control can be damaged by leaking batteries if not used for a long
period of time!
 Remove the batteries from the remote control if the device is not going to be
used for a long period.

3.4. Connecting the antenna

Your smart TV supports different antenna signals.
You can feed the following picture signals via the connection labelled ANT.
• via analogue cable/an analogue house antenna,
• via a DVB-T/ DVB-T 2
• via a DVB-C 2 connector (digital cable)
2
This service must be available in your region.
1
(optional)
2
3x
1
4 x M6 x 20
3
2
antenna or
3x
2
4 x M4 x 16
4 x M4 x 16
4
EN
9