JVC BR-DV3000E Mode D'emploi page 52

Using the unit in an editing system
EDIT
–
Using the unit in a non-linear system
This is a system that captures the content of the source tape on a non-linear editing system
and records the non-linear edited contents onto the main unit.
Connection
DV
Terminal
DV IN/OUT
AUDIO VIDEO
LINE
CH 1/3 CH 2/4
AUDIO
Audio
OUT
Setting this unit
The REMOTE SEL. switch on the front
panel can be set at any position.
Set the REMOTE menu.
• REMOTE:
Set it to "ON".
• REMOTE FF/REW MODE:
Use this menu item to select the action to be
executed when an FF or REW command is re-
ceived during playback (FF/REW or search).
If the search and locate function does not work
well, set it to SEARCH.
• CONTROLLER TYPE (REMOTE 2/2 menu):
Set it to "TYPE 1".
E-52
BR-DV3000_E_p50-71
IEEE1394 (video, audio, control)
Video
VIDEO OUT
Y/C
REMOTE
DC12V
NTSC/PAL
9PIN
SERIAL NTSC PAL
Remote controller
52
– (continued)
Non-linear editing system
Memo
If an error occurs to the time code of BR-
DV3000 when the tape is advanced /re-
versed by 1 frame by the non-linear edit sys-
tem, please set the STILL mode of the main
unit to "FRAME".
13/01/03, 11:39 AM