Arming The System - Velleman SP150 Mode D'emploi

To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Enter you personal disarm code easily - day or night - on the backlit keypad. The red
flashing (*) key indicates system armed.
Features :
1. Automatic passive arming ; 15 second delay.
2. Four digit personal entry code to disarm.
3. Status indicator mode :
a) Armed : (*) key flashing RED
b) Disarmed : no light on keyboard
c) Ignition ON : keys illuminated
d) Valet mode : only (#) key illuminated GREEN
4. Interface with any passive alarm system.
YOUR CODE NUMBER_________________________
1. Turn the ignition key to ON position. All digits 0-9 will be illuminated.
2. Enter your four digit personal code. If code is right, illumination turns off.
3. Start your car.

ARMING THE SYSTEM

1. Turn OFF the ignition key. System will arm automatically in 15 seconds.
2. (*) key starts flashing red.
ENTER VALET MODE (for parking service, car wash, etc.)
1. If the car is running, press (#) key. This key lights GREEN indicating that the system
is in "valet" mode and you can start the car without entering your code.
2. If the car is not running, turn the key to ON position and enter 4 digit code, then press
(#) key.
SP150
OPERATING MANUAL SP150
KEYPAD STARTER KILL SYSTEM
INTRODUCTION
OPERATION
2
VELLEMAN