Kenwood KDC-X701 Mode D'emploi page 29

AUDIO SETTINGS
BASS BOOST LEVEL1/LEVEL2/LEVEL3/LEVEL4/LEVEL5: Selects your
preferred bass boost level. ; OFF: Cancels.
LOUDNESS LEVEL1/LEVEL2: Selects your preferred low and high
frequencies boost to produce a well-balanced sound at a low
volume level. ; OFF: Cancels.
SUBWOOFER SET ON: Turns on the subwoofer output. ; OFF: Cancels.
FADER REAR 15 to FRONT15 (0): Adjusts the rear and front speaker
output balance.
BALANCE LEFT 15 to RIGHT15 (0): Adjusts the left and right speaker
output balance.
VOLUME OFFSET LEVEL –15 to LEVEL +6 (LEVEL 0): Preset the initial volume
level of each source. (Before adjustment, select the source you
want to adjust.)
SOUND EFFECT
SOUND (Not applicable for TUNER source, AUX source and SIRIUS XM
RECONSTRA source.)
(Sound ON: Creates realistic sound by compensating the high-frequency
reconstruction) components and restoring the rise-time of the waveform that
are lost in audio data compression. ; OFF: Cancels.
SPACE (Not applicable for TUNER source.)
ENHANCER SMALL/MEDIUM/LARGE: Virtually enhances the sound space. ;
OFF: Cancels.
SOUND REALIZER LEVEL1/LEVEL2/LEVEL3: Virtually makes the sound more
realistic. ; OFF: Cancels.
STAGE EQ LOW/MIDDLE/HIGH: Virtually adjust the sound position heard
from the speakers. ; OFF: Cancels.
DRIVE EQ ON: Boosts the frequency to reduce the noise heard from
outside the car or running noise of the tyres. ; OFF: Cancels.
SPEAKER SIZE The frequency and slope settings are automatically set for the crossover of the
selected speaker.
FRONT SIZE 3.5"/4"/4.75"/5"/6.5"/6.75"/7"/4×6/5×7/6×8/6×9/
7×10: Selects according to the connected speaker size for
optimum performance.
TWEETER SMALL/MIDDLE/LARGE: Selects according to the size
range of the connected tweeter for optimum performance. ;
NONE: Not connected.
REAR 3.5"/4"/4.75"/5"/6.5"/6.75"/7"/4×6/5×7/6×8/6×9/7×10:
Selects according to the connected speaker size for optimum performance. ;
NONE: Not connected.
SUBWOOFER 6.5"/8"/10"/12"/15" OVER: Selects according to the connected speaker size
for optimum performance. ; NONE: Not connected.
X ' OVER
TWEETER FRQ 1KHZ/1.6KHZ/2.5KHZ/4KHZ/5KHZ/6.3KHZ/8KHZ/
10KHZ/12.5KHZ: Adjusts the crossover frequency for the
tweeter speaker.
GAIN LEFT –8 to 0: Adjusts the output volume of the left tweeter.
GAIN RIGHT –8 to 0: Adjusts the output volume of the right tweeter.
FRONT HPF FRONT-HPF 30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/100HZ/
FRQ 120HZ/150HZ/180HZ/220HZ/250HZ: Adjusts the crossover
frequency for the selected speakers (high pass filter). ;
THROUGH: All signals are sent to the selected speakers.
FRONT-HPF –6DB/–12DB/–18DB/–24DB: Adjusts the crossover slope.
SLOPE (Selectable only if a setting other than [THROUGH] is selected
for [FRONT-HPF FRQ].)
FRONT-HPF –8 to 0: Adjusts the output volume of the selected speaker.
GAIN
25
ENGLISH