Introduction; Features; System Requirements; Precautions - Sony SFD-FW200P Mode D'emploi

Introduction

Introduction

Features

This HiFD (High-Capacity Floppy Disk) 3.5 inch floppy drive
system offers the following:
• 200 MB* formatted storage capacity
• Compatibility with 1.44 MB & 720 kB diskettes
• High speed seek time (49 ms average)
• Parallel port interface
• Printer connector for printer attachment to drive
• 600 kB/s max transfer rate (with EPP/ECP port)
* 200 MB capacity, where 1 MB = 1 million bytes.

System requirements

• IBM-compatible PC, Pentium or higher
• Windows 95 or Windows 98
• 16 MB or more system RAM
• 5 MB of hard disk space
• Printer port with DB25 connector
• 3.5" floppy disk drive

Precautions

On Installation
Avoid areas with high humidity or temperature, mechanical
vibration and direct sunlight.
During Operation
• Operate drive only on a sturdy, flat surface.
• Do not move drive during operation, it may cause a
• Avoid sudden temperature change, it may cause internal
6
malfunction.
condensation. When moving the unit out of a low
temperature and into a place of high temperature, wait for a
while (one hour if possible) before turning on the unit.
Immediate operation after sudden temperature change may
cause malfunction.