Westfalia 305 268 300 113 Instructions De Montage page 14

15. Unlock the following wires and insert them into the white 3-pin socket housing provided on the
cable set:
Black/white (Avant RHD = white/red) wire from compartment 19 to compartment 3.
-
The black/red wire from compartment 20 into compartment 2.
-
Black wire from compartment 21 to compartment 1.
-
16. Insert the individual black/white, black/red and black wires of the 14-core cable set into the
now free compartments 19, 20 and 21 of the 32-pin plug as indicated by the colours.
17. Close the latch and re-insert the connector into the Comfort Control Unit.
18. Fit the now open 3-pin housings together as indicated by the colours.
19. Connect the brown wires with the eyelets to the vehicle's ground point (Fig. 1/2) at the rear
right.
20. Remove the rear cover on the right fuse carrier (Fig. 1/3) and open the violet latch. Insert the
following wires into the respective fuse chamber (remove component carrier before if
required):
The red wire into compartment 10.
-
The red/black wire into compartment 11.
-
The red/blue wire into compartment 12.
-
Note
If there is no brown fuse box on the right in the vehicle, one must be ordered from Votex,
number 4F0 055 307 (>>MY06), 4F0 055 307 A (MY07>>).
21. Close violet latch on the fuse carrier.
22. Insert the supplied 15 A fuses into fuse compartments 10, 11 and 12.
23. For 13-pin trailer socket only:
Using the white 3-pin connector for the constant plus extension kit, the functions "charging
lead" and "ground for charging lead" can be retrofitted (available in specialised shops under
the order number 300 028 300 113).
14
305 268 391 101 – 004 – 25/11
Installation instructions:
Electrical system for towing hitch
Audi A6