Maintenance And Storage; Accessories - Alpina B 28J Manuel D'utilisation

6
EN

5. MAINTENANCE AND STORAGE

WARNING!
tor switched off.
1. BLADE REDUCTION GEAR GUARD (Fig. 7)
– Lubricate every 20 hours through the grease
nipples provided.
– Only use lithium-based grease for high temper-
atures and extreme pressures.
2. MAINTENANCE AND SHARPENING
OF THE BLADE
WARNING!
blades are not bent or damaged and that the
fixed comb on the blade is intact.
Adjustment of the distance between blades is not
necessary, as this is predetermined by the manu-
facturer.

6. ACCESSORIES

Only cutting tools with the following codes must be
used on this machine:
118801754/0
Always work with the mo-
Periodically check that the
MAINTENANCE AND STORAGE / ACCESSORIES
If the blades are used correctly, following all the in-
structions provided, they will not require any main-
tenance work and will not need sharpening.
It is necessary to sharpen the blades only when the
trimming performance decreases and the branches
tend to stick together.
NOTE
should always be conducted at a specialised Cen-
tre that has the most appropriate tools and is able
to perform the operations without compromising the
safety of the machine.
Given the product evolution, the above mentioned
tools may be replaced in time by others, with sim-
ilar interchangeable and operating safety charac-
teristics.
Any intervention on the blade