Alarms, Snooze And Sleep; Setting An Alarm; Sleep Timer - RuarkAudio R1 mk3 Guide De L'utilisateur

Alarms, snooze and sleep

Setting an alarm

An active alarm is indicated by the alarm icon (27) and
when it sounds, the icon flashes.
Press ALARM once to set or change alarm 1 and twice
for alarm 2, then press the CONTROL KNOB to select.
Follow the on-screen instructions to set the alarm time,
duration, source and volume by using the CONTROL
KNOB. Rotate it to scroll through options and press it
to select.
You will also be prompted to choose if and when the
alarm repeats (daily, once, weekends or weekdays) and
you can choose to have the alarm play a radio station or
sound a tone. Please note that it is not possible to use a
Bluetooth source for the alarm.
IMPORTANT: the alarms will not work when running off
a BackPack battery. To use the alarm function, your R1
must be plugged into mains power.
Quickly turn alarms on and off
Press ALARM once for alarm 1 and twice for alarm 2,
then rotate the CONTROL KNOB to choose On or Off,
and finally press the knob to save the setting.
Snooze
Press the CONTROL KNOB to temporarily silence a
sounding alarm, press it again to increase the snooze
period (5, 10, 15 or 30 minutes).
To cancel an alarm that is sounding or snoozing, press
and hold the CONTROL KNOB for two seconds or
press ALARM.

Sleep timer

To set the time after which your R1 will automatically
switch to standby, press SLEEP for two seconds. Then
press the CONTROL KNOB, rotate it to choose the
delay in minutes (Off, 15, 30, 45, 60, 90) and finally press
the knob again to confirm your selection. The display
then returns to the Now-playing screen and displays the
sleep icon (28).
Alarms can also be set with your R1 radio in standby
EN
DA
DE
FR
IT
ES
NL
NO
EN-11