Introduction; How To Keep This Manual; Identification Data; Other Reference Manuals - Clarke SW 26 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ENGLISH

INTRODUCTION

NOTE
The numbers in brackets refer to the components shown in Machine Description chapter.
The purpose of this Manual is to provide the operator with all the information to get the best performances from Clarke SW 26.
Before operating the machine, read carefully the following information.
The machine here described is intended for commercial use only.

HOW TO KEEP THIS MANUAL

The Operator's Manual must be kept near the machine, inside an adequate case, away from liquids and other substances that
can cause damage to it.

IDENTIFICATION DATA

The machine Model and Serial Number are shown on the plate on the machine itself.
The machine production year is indicated by the first two figures of the machine serial number.
This information is useful when requiring machine spare parts. Use the following table to write down the machine identification
data.
MACHINE model ...............................................................................
MACHINE serial number ...................................................................

OTHER REFERENCE MANUALS

Spare Parts List (supplied with the machine)

SPARE PARTS AND MAINTENANCE

Any repair must be performed at authorized Clarke Service Centers by qualified personnel, which will use original spare parts
and accessories. Contact your Clarke Dealer for any repair or service, and specify your machine model and serial number.

CHANGES AND IMPROVEMENTS

Clarke constantly improves its products and reserves the right to make changes and improvements at its discretion without
being obliged to apply such benefits to the machines that were previously sold.
Any change and/or addition of accessory must be approved and performed by Clarke.

UNPACKING/DELIVERY

Upon delivery check that the packing and the machine were not damaged during transportation. In case of visible damages,
keep the whole packing to have it checked. Contact your Clarke Dealer immediately to file a freight damage claim.
Remove the sweeper from the packing, loosen the knobs (2) and unfold the handlebar (1). Tighten the knobs to fasten the
handlebar.

IMPORTANT SAFETY INSTRUCTIONS

This machine is intended for commercial use only, i.e. hotels, schools, factories, shops and offices, that is to say that it is not
intended for domestic use.
Read all the instructions before use.
2
Operator's Manual - SW 26

Publicité

Table des Matières
loading

Table des Matières