Assembly - Aventics VS CL03 Mode D'emploi

AVENTICS | CL03/CL03-XL | R402000141–BDL–001–AE
6

Assembly

The CL03/CL03-XL series valve system, is configured and
dimensioned for a specific application and is delivered
completely fitted with all components according to an individual
configuration.
The valve system may also be converted and extended
compared to the original configuration, see "Conversion and
Extension" on page 87.
– Check that the minimum or maximum values stated in the
technical specifications are not exceeded.
– The warranty only applies to the delivered configuration.
Risk of injury or damage due to uncontrolled system
components!
Connection of compressed air while the VS is being installed
may lead to physical injury or system damage.
O
Make sure that the relevant part of the system is not
under pressure during installation.
O
Make sure that the VS is completely installed before
connecting compressed air.
O
Secure the system against reconnection if it has to be left
unattended during installation.
WARNING
71
Assembly