REMEHA Gas 310 ECO Notice D'utilisation page 9

fig. 02 Rear view Remeha Gas 610 ECO
00.61H.00002
1 Pressure gauge
2 Connection point for optional external ther-
mostat
3 Flow connection
4 Connection point optional second return
5 Return connection
6 Fill and drain cock
7 Drain pan
8 Temperature sensor - flue gas
9 Condense connection
10 Combustion test point O
11 Line wheel
12 Set screw
13 Condense drain hose
14 Flue gas outlet
15 Inspection hatch
Adapter ø 250/ ø 200 (option)
16
17 Heat exchanger
18 Temperature sensor - flow
19 Air supply
20 Air inlet plate
Adapter ø 200/ ø 250 (option)
21
An intelligent, advanced boiler control* ('abc
ously monitors the boiler conditions, varying the heat
output to suit the system load. The control is able to
react to external "negative" influences in the rest of the
system (flow rates, air / gas supply problems) maintain-
ing boiler output for as long as possible without resorting
to a lock out condition. At worst the boiler will reduce
/CO
2 2
') continu-
®
22 Gas connection
23 Inspection glass
24 Combined ignition/ionisation probe
25 Temperature sensor - return
26 Temperature sensor - heat exchanger
27 Frame
28 Turn wheel
29 Air supply fan
30 Venturi
31 Gas multiblock
32 Non return valve
33 Gas filter
34 Differential pressure switch
35 Air box
36 Instrument panel
37 Boiler setting keys
38 Read-out display
39 Optional incorporateable weather compensator
rematic
®
40 On/off switch
41 Flue gas collector
42 Flue gas damper
it's output and/or shut down (shut off mode) awaiting
the "negative" conditions to return to normal before re-
starting. The 'abc ' control cannot override the standard
®
flame safety controls.
* The Remeha Gas 610 ECO has a boiler control unit
on each boiler module.
9