Makita UR002G Manuel D'instruction page 12

Attaching the barrier
For the loop handle model only (country specific)
If the barrier is included in your model, attach it to the
handle using the screw on the barrier.
► 1. Barrier 2. Screw
CAUTION:
After assembling the barrier, do
not remove it. The barrier works as a safety part
to prevent you from contacting the cutting blade
accidentally.
Hex wrench storage
CAUTION:
Be careful not to leave the hex
wrench inserted in the tool head. It may cause
injury and/or damage to the tool.
When not in use, store the hex wrench as illustrated to
keep it from being lost.
► 1. Hex wrench
For the loop handle model, the hex wrench can also be
stored on the handle as illustrated.
1
► 1. Hex wrench
2 Correct combination of the cutting
tool and the protector
nation of cutting tool and the protector. A wrong
combination may not protect you from the cutting tool,
flying debris, and stones. It can also affect the bal-
ance of the tool and result in an injury.
Nylon cutting head
1
Installing the protector
guard or with the guard improperly installed.
Failure to do so can cause serious personal injury.
the cutter for cutting the nylon cord.
Attach the protector to the clamp using bolts.
► 1. Clamp 2. Protector 3. Cutter
12 ENGLISH
CAUTION:
Always use the correct combi-
Cutting tool
WARNING:
Never use the tool without the
CAUTION:
Take care not to injure yourself on
2
1
Protector
1
3