Specified Conditions Of Use; Ec Declaration Of Conformity - Milwaukee M12 HV Notice Originale

TECHNICAL DATACORDLESS VACUUM CLEANER
Production code............................................................................
Power input...................................................................................
Rate of air fl ow..............................................................................
Rate of air fl ow..............................................................................
Vacuum .........................................................................................
Vacuum .........................................................................................
Capacity........................................................................................
Container ...................................................................................
Solid ...........................................................................................
Filter Surface ................................................................................
Suction hose diameter ..................................................................
Battery voltage..............................................................................
Weight according EPTA-Procedure 01/2003 ................................
Noise information
Measured values determined according to EN 60 745.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A)) .............................
Sound power level (Uncertainty K=3dB(A)) ..................................
Wear ear protectors!
Total vibration values (vector sum in the three axes) determined
according to EN 60745.
Vibration emission value a ..........................................................
h
Uncertainty K= ..............................................................................
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given
in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained, the vibration emission may differ. This may signifi cantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may signifi cantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work patterns.
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and instructions
may result in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
SAFETY INSTRUCTIONS
You are not allowed to use the appliance in the vicinity of
infl ammable gases or substances.
Do not point the nozzle at people or animals.
Acids, acetone and solvents can corrode the appliance
components.
In the event of misuse, improper operation or unprofessional
repair work no liability shall be assumed by us for any
damage incurred.
Do not use suction on health damaging dusts.
Remove the battery pack before starting any work on the
machine.
Do not dispose of used battery packs in the household
refuse or by burning them. Milwaukee Distributors offer to
retrieve old batteries to protect our environment.
Do not store the battery pack together with metal objects
(short circuit risk).
Use only System M12 chargers for charging System M12
battery packs. Do not use battery packs from other systems.
Battery acid may leak from damaged batteries under
extreme load or extreme temperatures. In case of contact
with battery acid wash it off immediately with soap and
water. In case of eye contact rinse thoroughly for at least 10
minutes and immediately seek medical attention.
14 ENGLISH
M12 HV
..................... 4483 91 01...
...000001-999999
.............................8 A
.........................934 l/min
...........................56 m 3 /h
........................ 3,11 kPa
........................31,1 mbar
........................0,75 l
..........................0,6 l
......................> 440 cm
2
........................22,5 mm
...........................12 V
..........................1,2 kg
........................85,6 dB (A)
........................73,6 dB (A)
......................0,961 m/s 2
..........................1,5 m/s 2
This machine is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge.
Children should be supervised to
ensure that they do not play with
the appliance.
WARNING: Operators shall be adequately instructed on the
use of these machines.
WARNING: This machine is not suitable for picking up
hazardous dust.
WARNING: This machine is for dry use only.
CAUTION: This machine is for indoor use only.
CAUTION: This machine shall be stored indoors only.

SPECIFIED CONDITIONS OF USE

The vacuum cleaner may be used for suction of non-toxic
dusts.
Not suitable for sweeping up liquids.
This machine is intended for commercial use, for example in
hotels, schools, hospitals, factories, shops, offi ces and
rental businesses.
Do not use this product in any other way as stated for
normal use.
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that the product
described under "Technical Data" fulfi lls all the relevant
regulations and the directives 2011/65/EU (RoHs),
2006/95/EC, 2004/108/EC and the following harmonized
standards have been used:
EN 62233
EN 60335-1:2012
EN 60335-2-69:2012
EN 55014-1
EN 55014-2
EN 50581:2012
Winnenden, 2014-09-26
Alexander Krug
Managing Director
Authorized to compile the technical fi le.
Techtronic Industries GmbH
Max-Eyth-Straße 10
71364 Winnenden
Germany
BATTERIES
Battery packs which have not been used for some time
should be recharged before use.
Temperatures in excess of 50°C (122°F) reduce the
performance of the battery pack. Avoid extended exposure
to heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept
clean.
For an optimum life-time, the battery packs have to be fully
charged, after used.
To obtain the longest possible battery life remove the battery
pack from the charger once it is fully charged.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below 27°C
and away from moisture
Store the battery packs in a 30% - 50% charged condition
Every six months of storage, charge the pack as normal.
MAINTENANCE
Use only Milwaukee accessories and Milwaukee spare
parts. Should components need to be replaced which have
not been described, please contact one of our Milwaukee
service agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered.
Please state the machine type printed as well as the six-digit
No. on the label and order the drawing at your local service
agents or directly at: Techtronic Industries GmbH,
Max-Eyth-Straße 10, 71364 Winnenden, Germany.
SYMBOLS
CAUTION! WARNING! DANGER!
Remove the battery pack before starting any
work on the machine.
Please read the instructions carefully before
starting the machine.
Do not dispose of electric tools together with
household waste material.
Electric tools and electronic equipment that
have reached the end of their life must be
collected separately and returned to an
environmentally compatible recycling facility.
Check with your local authority or retailer for
recycling advice and collection point.
European Conformity Mark
EurAsian Conformity Mark.
ENGLISH 15