Table Des Matières - Titan POWRMAX 605 Mode D'emploi

PowrMax
1 SAFETY REGULATIONS ___________________ 4
1.1 Explanation of symbols used _____________________4
1.2 Electric safety _________________________________6
1.3 Machine usage ________________________________6
1.4 Setup on an uneven surface _____________________6
2 INTRODUCTION TO WORKING WITH THE
MORTAR SPRAYING MACHINE
POWRMAX 605 __________________________ 7
2.1 Function overview of the mortar spraying machine
PowrMax 605 _________________________________7
2.2 Processible coating materials ____________________7
3 TECHNICAL DATA ________________________ 8
4 EXPLANATORY DIAGRAM FOR
POWRMAX 605 __________________________ 8
4.1 Operating elements and displays on device ________8
4.2 Drive _______________________________________10
4.3 Compressor (accessory) ________________________10
4.4 Mortar hose _________________________________11
4.5 Spray lance __________________________________11
5 TRANSPORTATION ______________________ 12
5.1 Moving _____________________________________12
5.2 Transport using a crane (fig. 4) __________________12
5.3 Transportation in vehicle _______________________12
6 COMMISSIONING _______________________ 12
6.1 Installation location ___________________________12
6.1.1 Connection to mains power supply/ Extension cable 12
6.2 Initial starting-up _____________________________12
6.2.1 Scope of supply ______________________________12
6.2.2 Assembly (fig. 5) ______________________________13
6.3 Connecting the mortar hose ____________________13
6.4 Compressor (accessory) ________________________13
6.5 Spray attachment assembly (accessories) _________14
6.6 Connecting the spray lance (fig. 10) ______________14
6.7 Preparing the mortar spraying machine (fig. 12) ____15
6.7.1 Rinse the mortar hose _________________________15
6.8 Beginning of the spraying process _______________16
6.9 End of the spraying process ____________________16
7 GENERAL INFORMATION ABOUT THE
APPLICATION TECHNIQUE _______________ 17
7.1 Spraying technique ___________________________17
8 SHUTTING DOWN AND CLEANING ________ 17
8.1 Cleaning the mortar hose ______________________17
8.2 Cleaning the device and replacing the stator_______18
8.3 Cleaning the spray lance _______________________19
9 MAINTENANCE _________________________ 20
9.1 Mechanical maintenance ______________________20
9.2 Electrical maintenance ________________________20
9.3 Long periods of non-usage _____________________20
9.4 Shaft seal (fig. 16) _____________________________20
9.5 Rotor replacement ____________________________21
10 ELIMINATING FAULTS ________________ 22-24
WARRANTY _________________________________ 25
SPARE PARTS LIST FOR POWRMAX 605 ________ 74
Spare parts list for main assembly _____________________74
Spare parts list for frame ____________________________75
Spare parts list for spray lance _____________________ 76/77
ACCESSORIES ____________________________ 78/79
CONTENTS
3