Filter - KERN PCB Mode D'emploi

Filter

only models:
PCB 100-3
PCB 250-3
PCB 350-3
PCB 1000-2
PCB 2500-2
PCB 3500-2
PCB 6000-1
PCB 10000-1
(exemple)
PCB-BA-e-1617
This menu item allows the balance to be set according to
specific ambient conditions and measuring purposes.
 In weighing mode keep the PRINT key pressed until [Unit]
appears.
 Press the MODE button several times until „StAbiL" is
displayed.
 Acknowledge using SET button, the current setting is
displayed.
 Select the desired settings by pressing the MODE button.
1 Filter 1:
The balance reacts quickly and in a sensitive manner, quiet set-
up location.
Filter 2:
2
The scale reacts normally, normal installation site
3 Filter 3:
The balance reacts slowly and in a robust manner, busy set-up
location
 Use the SET key to confirm selection.
31