Method Of Operation - MAGIMIX Le Glacier 1.5 Mode D'emploi

Masquer les pouces

Table des Matières

Les langues disponibles

Before using ensure that the voltage indicated under the motor unit corresponds with the

main voltage in your home.

FREEZING THE BOWL

Remove the motor/lid unit and paddle by releasing the motor/lid release switch (1) and turning

the motor/lid unit in an anti-clockwise direction. The releasing of the motor/lid switch will

unlock the motor/ lid unit.

of 12 hours or preferably overnight and only remove when your mixture is ready. As a final

check, shake the bowl. There should be no sound of freezing agent moving inside the bowl.

PREPARING THE ICE CREAM MIxTURE

Select your recipe and follow it to prepare the mixture, adjusting the quantity to the size

of your machine (see page 31 for quantities). It is important not to overfill the bowl,

otherwise the mixture will not freeze properly.

Always chill your mixture in the fridge before attempting to freeze-churn. Most recipes

take 20-30 minutes of churning to produce a delicious soft ice cream.

ASSEMBLING THE ICE CREAM MAKER AND FREEZE-CHURNING

If disassembled, assemble the Le Glacier Ice Cream Maker as follows :

• Remove the bowl from the freezer

• Separate the clear lid/feed tube from the motor by pulling apart until the " keyhole " part of

the clear lid/feed tube is over the hole in which the spindle fits.

• Push the spindle into the hole and slide the clear lid/feed tube back into position, ensuring

that the non-keyhole part and the lid fits between the top and bottom collars of the spindle.

• Fit the plastic paddle onto the spindle. The lid/motor unit is now ready to lock onto the bowl.

• Place the complete top unit onto the bowl and turn in a clockwise direction until resistance

is met. A this point the clips on the top of the unit should be engaged over the clips on the

bowl. Depress the motor/and lid release button to lock the top unit into position.

• Connect the plug to the electrical socket and switch on. The paddle should be turning

before pouring in the mixture in order to prevent the mixture from freezing to the side

of the bowl.

• WARNING : If the complete top unit is not correctly locked on the bowl, it will be impossible

to switch the motor on.

• Once the paddle is turning, pour the chilled mixture through the feed tube of the clear lid

and freeze churn for between 20-30 minutes.

As the mixture thickens, the paddle may re-

verse, this is not unusual. When the desired consistency is reached, switch off the motor (1).

The finished result is a soft spoonable Italian ice cream. This can be transferred to a sepa-

rate container for storage in the freezer, or if you wish to firm the ice cream further before

eating.

• Having switched off the motor, the locking mechanism between the motor/lid and the bowl,

will be released. Turn the motor/lid unit in an anti-clockwise direction and lift off.

IMPORTANT

It is not advisable to use metal ustensils to take the ice cream out of the stainless steel bowl,

as this could cause scratching.