Maintenance And Storage - Bo Jungle Humi-Purifier Mode D'emploi

OPERATING INSTRUCTIONS
Warning: before filling the tank of the device with water, turn the power off and unplug it.
1. Take the water tank off and turn it upside down. Open the tank and insert clean water.
2. Close the tank. In case there are drops of water on it, wipe them off. Reassemble properly.
3. Install the water filter in the circular opening in the tank. It filters the water and has a silencing effect on the operation of the
machine.
4. Connect the unit to an AC power supply, then turn the knob to start the humidification function and define the desired
intensity of humidification. The nightlight and air purification function will also start automatically.
5. When the water in the tank runs out, the built-in safety device will automatically stop the humidification function. To
continue the operation, please cut off the power supply and replenish the water tank.
6. When the device has been used for some time, you will need to replace the air filter, which is sold in a package together with
a water filter by the manufacturer. To replace the filter at the back, simply push and the filter will pop out. When used
regularly, we recommend changing both the water and air filters every 3 months.
Warning: before replacing the filters, turn the power off and unplug the device.

MAINTENANCE AND STORAGE

Always make sure the device is unplugged before cleaning or emptying it.
- Cleaning of water tank (once every 2-3 weeks): screw off the water tank cover, remove the lime scale and rinse with water
- Cleaning of the base (once a week): if there is lime scale in the base, wipe it off with a soft cloth dipped in a mixture of
vinegar (1/10) and water (9/10)
- External cleaning: dip a soft cloth in warm water of below 40°C, wipe off the exterior of the machine. The nozzle can be
flushed with water directly.
- Use only a mixture of vinegar (1/10) and water (9/10) to clean the appliance. Do not use any other cleaning agents.
- Replace the water in the tank frequently to keep the unit clean.
- Use a damp, clean cloth to clean the appliance.
- Never immerse the appliance in water or other liquids. Never place it directly under the tap.
Storage:
- Remove the water when the unit is not to be used for a longer period of time. Before storing it, also (air) dry all parts and
place the product back in its original package. Otherwise lime scale can damage the machine.
Please remember:
- Never touch the oscillating transducer with a sharp hard tool. Clean it with a wet cloth only.
- Do not wipe the surface or base of the machine with chemical solvents, gasoline, kerosene or polishing powder.
4