Declaration Of Performance - Hornbach 6145083 Manuel D'installation Et De L'utilisateur

Declaration of performance

DOP 61450831-CPR2, Version: 20200923
1. Unique identification code of product type:
-
Side blind 1.6x3 PE grey (6145083)
-
Side blind 1.8x3 PE grey (6145084)
-
Side blind 1.6x3 PE beige (6145085)
-
Side blind 1.8x3 PE beige (6145086)
-
Side blind 1.6x3 PE light grey (10328339)
-
Side blind 1.8x3 PE light grey (10328340)
2. Type, batch or serial number or other label for the
identification of the product referred to in Article 11 /
Paragraph 4:
6145083, 6145084, 6145085,
6145086, 10328339, 10328340
3. The manufacturer's intended use or intended uses
of the product in accordance with the applicable har-
monized technical specification:
Application in the exterior of buildings and other
structures
4. Name, registered trade name or registered trade
mark and contact address of the manufacturer in ac-
cordance with Article 11 / Paragraph 5:
HORNBACH Baumarkt AG
Hornbachstraße11
76879 Bornheim/Germany
www.hornbach.com
5. Where appropriate, the name and contact address
of the authorized representative, responsible for the
tasks referred to in Article 12 / Paragraph 2:
Not relevant
6. System or systems for the assessment and verifi-
cation of the reliability of performance of the product
according to Annex V of the Construction Products Di-
rective:
System 4
7. Not relevant (for System 4 there is no notified body).
8. Not relevant.
9. Declared performance
Main Features Performance
Resistance to Class 2
wind loads
Total energy NPD
dissipation g
tot
10. The performance of the above product corresponds
to the declared performance/s as defined in No. 9. The
above manufacturer is solely responsible for the prep-
aration of the service declaration in accordance with
Regulation (EU) No. 305/2011.
Signed for the manufacturer and on behalf of the man-
ufacturer by:
Andreas Back
Head of Quality Management, environment & CSR
Person authorised to compile the technical file
Bornheim, 23.09.2020
HORNBACH Baumarkt AG,
Hornbachstraße 11
76879 Bornheim / Germany
Harmonized technical
specification
EN 13561
ENGLISH | 109