IME DG4P Guide D'utilisation page 26

25
10780631 • 07 - 2003 3 rd Ed.
with the programming
(see item 23)
b SIf you want to modify the type, act on
230 Display shows SEt
L
241 Pressing once the display shows the loaded threshold
.
tion point)
a If the displayed value is the desired one, press
with the programming
(see item 25)
b If you want to modify the value, act on
desired one, then press PgUp
250 Display shows HYS
L
261 Pressing once the display shows the loaded hysteresis
a If the displayed value is the desired one, press
with the programming
(see item 27)
b If you want to modify the value, act on
desired one, then press PgUp
270 Display shows dEL
281 Pressing once the display shows the loaded delay.
a If the displayed value is the desired one, press
with the programming
(see item 29)
b If you want to modify the value, act on
desired one, then press PgUp
290 Display shows End, simultaneously press
ming.
300 Display shows Sto. The meter stores the setting and automatically
leaves the programming menu. I
L
then press PgUp
(alarm interven-
PgUp and go on
L M
or until you get the
PgUp and go on
L M
or until you get the
PgUp and go on
L M
or until you get the
LM
to confirm the program-
Sommaire
Instructions pour l'installation 2
Description de la face avant
Paramètres programmables
Affichage
Programmation
Alarmes
I.M.E. S.p.A. se réserve à chaque moment le droit de modifier les caractéristiques sans préavis écrit.
10780631 • 07- 2003 3 a Ed.
3
4
5
6
11