Table Des Matières; Declaration Of Conformity; Safety; Authorized Use - Powermatic PM1500 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

GB - ENGLISH
Operating Instructions
Dear Customer,
Many thanks for the confidence you have shown in us with the purchase of your new POWERMATIC-machine. This manual has been prepared
for the owner and operators of a POWERMATIC PM1500 band saw to promote safety during installation, operation and maintenance
procedures. Please read and understand the information contained in these operating instructions and the accompanying documents. To
obtain maximum life and efficiency from your machine, and to use the machine safely, read this manual thoroughly and follow instructions
carefully.
...Table of Contents
2. POWERMATIC Warranty
12. „Safe operation" ................ appendix A

1. Declaration of conformity

On our own responsibility we hereby declare that this product
complies with the regulations* listed on page 2. Designed in
consideration with the standards**. CE type examination***
performed by****.
2
2. POWERMATIC Group Warranty
The POWERMATIC Group makes every effort to assure that its
products meet high quality and durability standards and warrants
to the original retail consumer/purchaser of our products that
each product be free from defects in materials and workmanship
as follows:
2 YEAR LIMITED WARRANTY ON ALL PRODUCTS UNLESS SPECIFIED
OTHERWISE.
This Warranty does not apply to defects due to directly or
indirectly misuse, abuse, negligence or accidents, normal wear-
and-tear, repair or alterations outside our facilities, or to a lack of
maintenance.
The POWERMATIC group limits all implied warranties to the period
specified above, from the date the product was purchased at
retail.
To take advantage of this warranty, the product or part must be
returned for examination, postage prepaid, to an authorized repair
station designated by our office.
Proof of purchase date and an explanation of the complaint must
accompany the merchandise.
If our inspection discloses a defect, we will either repair or replace
the product, or refund the purchase price if we cannot readily and
quickly provide a repair or replacement, if you are willing to accept
a refund.
We will return repaired product or replacement at POWERMATIC'S
expense, but if it is determined there is no defect, or that the
defect resulted from causes not within the scope of
POWERMATIC'S warranty, then the user must bear the cost of
storing and returning the product.
The POWERMATIC Group reserves the right to make alterations to
parts, fittings, and accessory equipment which they may deem
necessary for any reason whatsoever.

3. Safety

3.1 Authorized use

This machine is designed for sawing wood, wood derived materials
as well as similar to be machined hard plastics only.
Machining of other materials is not permitted and may be carried
out in specific cases only after consulting with the manufacturer.
No metal workpieces may be machined.
The workpiece must allow to safely be loaded, supported and
guided.

Publicité

Table des Matières
loading

Table des Matières