Publicité
Intended use
6
Intended use
The SinePower inverters are used to convert a direct current of 12 V or 24 V
into a 230 Vw supply of 50 Hz.
12 V:
SinePower MSP 702, Item no. MSP700-012
SinePower MSP 1012, Item no. MSP1000-012
SinePower MSP 1512, Item no. MSP1500-012
SinePower MSP 2012, Item no. MSP2000-012
SinePower MSP 2512, Item no. MSP2500-012
24 V:
SinePower MSP 704, Item no. MSP700-024
SinePower MSP 1024, Item no. MSP1000-024
SinePower MSP 1524, Item no. MSP1500-024
SinePower MSP 2024, Item no. MSP2000-024
SinePower MSP 2524, Item no. MSP2500-024
WARNING! Danger of electrocution!
!
Never use the inverter on vehicles where the positive terminal of
the battery is connected to the chassis.
7
Technical description
The inverters can be operated wherever
a 12 Vg connection
(SinePower MSP 702, MSP 1012, MSP 1512, MSP 2012, MSP 2512)
a 24 Vg connection
(SinePower MSP 704, MSP 1024, MSP 1524, MSP 2024, MSP 2524)
is available. The light weight and compact construction of this device allow
for easy installation in mobile homes, commercial vehicles or motor and sail-
ing yachts.
The output voltage corresponds to the household voltage from the socket
(pure sine wave).
The inverter has a 230 Vw priority circuit. If an external 230 Vw voltage is
connected, this will have priority. If no external 230 Vw voltage is connected,
then the connected battery will be used as the power supply.
Please observe the values for constant output power and peak output power
as indicated in "Technical data" on page 55. Never connect devices that have
a higher power requirement.
40
SinePower
EN
Publicité
