tive battery. Dispose of
defective rechargeable
battery.
The product is
§
categorised as
protective class III and
thus operates with a
non-hazardous voltage
range.
§Do not leave the device
unattended whilst ope-
rating.
§Do not expose to poten-
tially explosive environ-
ments where there are
flammable liquids, dusts
or gases.
§Never submerge the
product in water or other
liquids.
§Use the product exclusi-
vely with the accessories
Deutsch |
English
| Français | Español | Português | Svenska
12
Italiano | Nederlands | Dansk | Suomi | Norsk
included with it.
§Do not use the device if it
is wet. Never operate the
device with wet hands.
The product may
§
only be charged in
closed, dry and spacious
rooms, away from com-
bustible materials and
liquids. Disregard can
result in burns and fires.
§Leaking battery fluid
can cause irritation if it
comes into contact with
the skin. Immediately
rinse affected areas with
fresh water and then
seek medical attention.
DANGER OF FIRE AND
EXPLOSION
§Never use non-rechar-
geable batteries (e.g.
alkaline or lithium)!
§Do not use while still in
the packaging.
§Do not cover the product
- risk of fire.
§Never expose the pro-
duct to extreme condi-
tions, such as extreme
heat/cold etc.
§Do not use in the rain or
in damp areas.
GENERAL INFORMATION
§ Do not throw or drop
§ Do not open or modify the product! Repair work
shall only be carried out by the manufacturer or
by a service technician appointed by the manufac-
turer or by a similarly qualified person.
§ Disconnect the device from the power supply only
by pulling on the plug or plug housing, never on
the cable.
FUNCTIONAL OVERVIEW
§ Charger for up to 4 Li-Ion rechargeable batteries
(3.6V/3.7V) / LiFePO4 (3.2V) 26650, 22650, 18650,
18500, 17670, 16340, 14500 etc. or 1-4 NiMH re-
chargeable batteries (1.2V) / AAA / AA or 1-2 Sub C
§ Includes a USB type-C charging cable
§ Single slot monitoring
§ Automatic detection of Li-Ion and NiMH rechar-
geable batteries, manual selection of LiFePO4
rechargeable batteries
§ Charging starts automatically once the batteries
have been inserted with the correct polarity
§ Microcontroller-monitored charging control (CC-CV
with Li-Ion/LiFePO4, 0dV/-dV with NiMH)
§ Temperature monitoring of each individual slot,
regardless of the battery type
§ Automatic battery-full detection and termination
of the charging process
§ Trickle charging for NiMH rechargeable batteries
§ Display of the charging status and the battery
parameters via the LCD
§ Indication of incorrectly inserted batteries (wrong
polarity)
§ Operation via a 5V DC USB adapter (not included)
EXPLANATION OF THE LCD DISPLAY
3
1
2
4
5
1. Display the battery voltage
2. Display the battery charging capacity, charging
current and battery charge in %
3. Display when the audible signal is activated
4. Display the battery chemistry
5. Circle symbol for the individual charging slot
status display.
13