Sony DPP-SV77 Mode D'emploi page 17

When you connect a computer that is already powered on to the
USB connector of the printer
The PC input indicator lights and the printer enters the PC mode.
MEMORY PC
STICK CARD
Notes
•Use a USB cable 3 m or shorter in length.
•Without connecting a computer that is already powered on to the USB connector,
you cannot switch to the PC mode manually by touching [INPUT SELECT].
•When you connect your printer to a television, no pictures are displayed on the
television in the PC mode. This is not due to trouble with the printer.
•Refer to the instruction manual of your computer for further information.
•You cannot use the printer and the printer driver on a network or with a
commercially available printer buffer.
Note on using a USB cable
If your USB cable is not equipped with a clamp filter, attach the supplied clamp filter
near the printer's USB connector of the cable .
To attach the clam filter, release the lock of the clamp filter with a screwdriver or a
similar tool, contain the cable, and lock the filter in place as illustrated below. Please
attach the filter as nearest the printer's USB connector as possible.
PC
GB
17