Parkside PAT 12 B2 Instructions D'utilisation Et Consignes De Sécurité page 43

˜ Belt clip
The belt clip
6 ] [
o
be hooked on a belt or pocket.
˜ Cleaning and care
WARNING!
m
Remove the battery pack
and let the product cool down
before performing inspection,
maintenance and cleaning
work!
Do not use chemical, alkaline,
abrasive or other aggressive
detergents or disinfectants to clean
this product as they might be harmful
to its surfaces.
Never allow uids to get into
the product.
The product must always be kept
clean, dry and free from oil or grease.
Remove debris from the product
after each use and before storage.
Regular and proper cleaning will help
o
ensure safe use and prolong the life
of the product.
Clean the product with a dry cloth.
o
Use a soft brush for areas that are
hard to reach.
40 GB/IE
allows the product to
5 ] [
˜ Maintenance
WARNING!
m
Remove the battery pack
and let the product cool down
before performing inspection,
maintenance and cleaning
work!
The product is maintenance-free.
o
Before and after each use, check the
o
product for wear and damage.
˜ Repair
This product does not contain any
o
parts that can be repaired by the
user. Contact an authorised service
centre or a similarly qualified person
to have it checked and repaired.
˜ Storage
WARNING!
m
Remove the battery pack
and let the product cool down.
Store the battery pack
o
Remove staples or nails from the
o
magazine .
[ 8 ]
Clean the product (see "Cleaning
o
and care").
Store the product in a dark, dry,
o
frost-free, well-ventilated place.
Always store the product in a place
o
that is inaccessible to children.
The ideal storage temperature is
o
between +10 °C and +30 °C and
relative air humidity not above 60 %.
Battery pack advice
When storing the battery pack
o
for 1 month or more: Only store the
battery pack partially charged. The
battery pack should be charged to
30 % to 70 % (red and orange LED
in the battery level indicator
before storage.
[ 5 ]
5 ] [
separately.
5 [
5 ] [
)
2 ] [