Parkside PAT 12 B2 Instructions D'utilisation Et Consignes De Sécurité page 37

3) When battery pack is not in use,
keep it away from other metal
objects, like paper clips, coins,
keys, nails, screws or other small
metal objects, that can make a
connection from one terminal
to another. Shorting the battery
terminals together may cause burns
or a fire.
4) Under abusive conditions,
liquid may be ejected rom t e
battery; avoid contact. If contact
accidentally occurs, us wit
water. I liquid contacts eyes,
additionally seek medical
help. Liquid ejected from the battery
may cause irritation or burns.
5) Do not use a battery pack
for tool that is damaged or
modi ed. Damaged or modified
batteries exhibit unpredictable
behaviour resulting in fire e plosion
or risk of injury.
6) Do not expose a battery pack
or tool to re or excessive
temperature. E posure to fire or
temperature above 130 °C may
cause explosion.
7) Follow all charging instruction
and do not charge the battery
pack or tool outside the
temperature range speci ed in t e
instruction. Charging improperly or
at temperatures outside the specified
range may damage the battery and
increase the risk of the fire.
CAUTION! RISK OF
EXPLOSION! Never charge
non-rec argeable batteries
Protect the rechargeable
battery from heat, for
max. 50°C
example from continuous
exposure to sunlig t, re,
water and moisture. There is
a risk of explosion.
34 GB/IE
Service
1) Have your power tool serviced by
a quali ed repair person using only
identical replacement parts. This
will ensure that the safety of the
power tool is maintained.
2) Never service damaged battery
packs. Service of battery packs
should be only be performed by
the manufactured or authorized
service providers.
˜ Tacker/Nailer safety
warnings
WARNING! Risk of injury!
m
Do not point the tool towards
u
yourself or anyone nearby.
Make sure that no other people or
u
animals are on the other side of
the workpiece or in the immediate
vicinity.
WARNING! Protect your eyes!
m
Wear safety goggles. This
also applies to people who
are carrying out support
during operation.
Secure the workpiece!
A workpiece securely held by
a clamping device or vice is
much safer than one held in
your hand.
1) Always assume that the tool
contains fasteners. Careless
handling of the tacker can result in
une pected firing of fasteners and
personal injury.
2) Do not point the tool
towards yourself or anyone
nearby. Une pected triggering
will discharge the fastener causing
an injury.