Parkside PAT 12 B2 Instructions D'utilisation Et Consignes De Sécurité page 34

Noise emission value
The measured values have been
determined in accordance with
EN 60745. The A-rated noise level of the
power tool is typically as follows:
Sound pressure level L
Uncertainty K :
pA
Sound power level L
Uncertainty K :
WA
Vibration emission value
Vibration emission values (triaxial
vector sum) determined according to
EN 60745:
Vibration emission value a
Uncertainty K:
WARNING!
m
Wear ear protection!
NOTE
The declared vibration total value
u
and the declared noise emission
value have been measured in
accordance with a standard test
method and may be used for
comparing one tool with another.
The declared total vibration
u
value and the declared noise
emission value may also be used
for a preliminary assessment of
exposure.
: 88.8 dB(A)
pA
3 dB
: 99.8 dB(A)
WA
3 dB
: 5.224 m/s
2
h
1.5 m/s
2
WARNING!
m
The vibration and noise emissions
u
during actual use of the power tool
can di er from the declared values
depending on the manner in which
the tool is used, especially what
kind of workpiece is processed.
Try to minimise exposure to
vibration and noise. Examples
of measures to reduce vibration
include wearing gloves when
using the tool and limiting working
time. All parts of the operating
cycle must be taken into account
(e.g. times when the power tool is
switched o and when it is running
idle in addition to the trigger time).
Safety instructions
˜ General power tool safety
warnings
WARNING!
m
Read all safety warnings,
instructions, illustrations
and speci cations provided
with this power tool. Failure
to follow all instructions listed
below may result in electric
shock fire and/or serious
injury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool.
Work area safety
1) Keep work area clean and well
lit. Cluttered or dark areas invite
accidents.
GB/IE 31