Technical Description; Rating Plate And "Ce" Marking; Technical Data; List Of Parts And Dimensions - TOPP TF23 Instructions Pour L'installation Et Mode D'emploi

3 3

TECHNICAL DESCRIPTION

3.1

RATING PLATE AND "CE" MARKING

The "CE" marking certifies the conformity of the TF with
the essential requisites of health and safety contemplated
by the European product directives. This marking
consists of an adhesive plate in polyester, silkscreen
printed in black, that is applied to the outside of the
device. The plate indicates legibly and indelibly the
following data:
3.2

TECHNICAL DATA

Table 1 lists the technical data that characterize the device.
SUPPLY VOLTAGE
OUTPUT VOLTAGE
OUTPUT VOLTAGE WITH OPTIONAL 230V CIRCUIT
MAX AND MIN CURRENT OF EACH OUTPUT
OUTPUT CURRENT OF OPTIONAL 230V CIRCUIT
OUTPUT CURRENT OF OPTIONAL 24V CIRCUIT
POWER ABSORBED
SERVICE
POSSIBLE CONNECTION TO EXTERNAL
DEVICES
DOUBLE ELECTRICAL INSULATION
WORKING TEMPERATURE
DIMENSIONS
GROSS WEIGHT
C20 24V ACTUATORS CONNECTABLE
OTHER 24V ACTUATORS CONNECTABLE
OPTIONAL 24V OUTPUT CURRENT CIRCUIT BOARD
3.3

LIST OF PARTS AND DIMENSIONS

Fig. 4 and fig.4a illustrates and names the main components of the unit power control.
TF33
EN INSTALLATION AND USE INSTRUCTIONS
· manufacturer's logo
· "CE" seal
· symbol of WEEE Directive 2002/96/CE
· symbol of double electric insulation
· type and model
· voltage (V) and frequency (Hz) of electrical power and
power (W) absorbed
· output voltage (V) and maximum output current (A)
· version
230V - 50Hz
max 0,5A - min 0,05A
TF23/TF33/TF33(O.B.230V)/TF33(O.B.24V)= 1.35A
TF33CR= Adjustable from 0,4A to 0,85A by trimmer
TF23-TF33= 32 W
TF33(O.B.230V)= 32 W
Depending on motors connected
Wind, rain sensor and
manual control
Yes
-5°C ÷ +50°C
150x78x55 mm
400 g
N. 3
(*) see formule
Adjustable from 0.40A ÷ 0.85A
using the potentiometer
Tab.
24V
230V
2A
TF33CR= 55 W
TF33(O.B.24V)= 55 W
21
1