Technical Information - SOLIS VAPO-FLÛTE Mode D'emploi

s TR O UBLE - S H OO TI N G
PROBLEM
The appliance
is not working
Atomizer chamber
is not filled with water
Mist output is too low
White precipitate
throughout the appliance
s TE C H NICA L I NF ORM AT ION
Model-No.
Product description
Voltage / Frequency
Power
Noise level
Surrounding-temperature
Suitable room size
Weight
Dimensions
Max. Water-capacity of the reservoir
Atomization volumes:
1. level: 40 %, 160 ml/h
3. level: 60 %, 240 ml/h
5. level: 80 %, 320 ml/h
7. level: 95 %, 380 ml/h
48
POSSIBLE CAUSE
Appliance is not plugged in
No water in reservoir (indicator
light shows it is empty)
Decalcification cartidge used up
Water temperature too low
Calcification on the membrane
Decalcification cartridge used up Change the decalcification
DF-HU23010, Type 711
SOLIS Vapo-Flûte Ultrasonic-Humidifier
220–240 V~ / 50 Hz
35 Watt
 40 dBa
10 °C–40 °C
45 m
2,5–2,7 kg
ca. 57–110 x 22,5 cm (H x Ø)
4,5 l
2. level: 50 %, 200 ml/h
4. level: 70 %, 280 ml/h
6. level: 90 %, 360 ml/h
8. level: 100 %, 400 ml/h
POSSIBLE SOLUTIONS
Insert the plug into a socket
Fill the water reservoir
Change the decalcification
cartidge
Set the atomization level to the
maximum. After about 10 mins
the appliance will be working
perfectly again
Clean the membrane
cartridge
2 / 108 m 3