Setting Date And Time - Lovibond Tintometer MD 110 Mode D'emploi

Photometer-system
Masquer les pouces Voir aussi pour Tintometer MD 110:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 72
Menu options
GB
Mode
Store
Date
ncon
1
Time
Cal
Store
Date
con
1
Time
Cal
Mode
Store
Date
PtrG
1
Time
Cal
On
Off
Store
Date
2
3
Time
Cal
Mode
SET
DATE
YYYY
(2 sec.)
Mode
Zero
Test
MD110_1 12/2016
A software tool is available for PCs to receive data stored on the pho-
tometer. The data can be exported to an Excel
enables users to process the information according to their usual
practice. If Excel
is not available, the data can be stored as a .txt file
®
for processing at a later date. A Bluetooth
the data. This is part of the delivery content of the software.
Description
Software, incl. Bluetooth
Peripherals must be ready. Press the [MODE] key to start the trans-
mitting.
The display shows the status of the Bluetooth
The display shows: „ncon" (not connecting).
If necessary an update of the list of recognized devices in the software
on the peripheral devices may be required. See therefor the instruction
of the AquaLX or the data transmission software for the bluetooth
dongle.
The display shows: „con" (connecting).
Press the [MODE] key to start the transmission, the instrument shows
"PrtG" (Printing) during the data transmission and connection.
All data sets will be transmitted one after the other. After finishing
the instrument switches to test mode and the Bluetooth
is interrupted.
The transfer can be cancelled at any time by pressing the [On/Off] key.
The instrument switches off.
3
Setting date and time (24-hour-format)
2
After confirming the selection with the [MODE] key the value to be
edited will be shown for 2 sec.
The setting starts with the year (YYYY) followed by the actual value
to be edited. The same applies for month (mm), day (dd), hour (hh)
and minutes (mm). Set the minutes first in steps of 10, press the [!]
key to continue setting the minutes in steps of 1.
Increase the value by pressing the [MODE] key.
Decrease the value by pressing [ZERO/TEST] key.
dongle is required to receive
®
Part Number
®
Dongle
2444480
®
connection:
®
spreadsheet which
®
connection
67

Publicité

Table des Matières
loading

Table des Matières