Maximum Permitted Wind Strength - Stobag ALFRESCO P4000 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12
Operating instructions
Modifications may be made to a sun protection system or the configuration of an auto-
matic system with electric power only with the agreement of STOBAG or the specialist
supplier. Modifications to a sun protection system can create a dangerous situation and
considerable risk of damage to people or objects.
Any dismantling or re-installation may only be made by technically qualified and trained
personnel. It must be ensured that the correct brackets and fixing materials must be used
for the surface on which the system is to be installed. The height the system is installed at
must exclude the possibility of harming people as it is extended.
Important for electrically-powered sun protection systems! Risk of electric shock! Work
on electrical components may only be carried out by qualified electricians. Examine power
cables regularly for wear or other damage. The drive must never be used if the power
supply cable is damaged.
If there is a problem with the sun protection system, please contact your STOBAG special-
ist supplier.
1.3

Maximum permitted wind strength

The sun protection system has been constructed that the largest size meets the re-
quirements for wind resistance class 3 in the CE conformity classification (see table 1.4).
What wind resistance class after assembling has been achieved depends largely on the
type and quantity of the used fixing materials used and the surface it is installed upon.
The sun protection system may only be used up to the declared wind resistance class
declared by the installer.
System
WRC
www.stobag.com
ALFRESCO
PERGOLINO
P4000
P3000 / P3500
3
3
EN-34
RIVERA
P5000
4
All rights to make modifications are reserved

Publicité

Table des Matières
loading

Table des Matières