Safety Instructions And Warnings; Safety Information - Matrix KS 200-1 Notice Originale

Safety instructions and warnings

Read through the instructions
for use before starting up the
equipment and pull the plug.
Risk of inhaling the grinding
dust. You must wear additional
personal protection
equipment (mask).
Risk of injury for your hands.
You must wear additional
personal protection
equipment (gloves).
Risk of hair becoming caught.
You must wear additional
personal protection
equipment (helmet).
High noise level. You must wear
additional personal protection
equipment (ear plugs or ear
protectors).
Risk of eye injury. Additional
personal protection equipment
is required (goggles).
The equipment complies with the
safety regulations required for
electrical
equipment.
Read through the instructions for use before
starting up the equipment.
Improper use can lead to personal injury and
property damage. Persons, who are not familiar
with the instructions, may not operate the
equipment.
20
Keep the instructions for use in safe custody.
Children and youths are not permitted to
operate the equipment.
Use According to Specifications
This machine is designed for sharpening saw
chains ¼" 325 and 3/8" 404 models which are
used professionally or privately. The machine
may only be used by one operator at any one
time.
The manufacture assumes no liability
whatsoever for improper use or if the machine
has been tampered with.
Give equal attention to the safety instructions,
assembly and operating instructions as well as
prevailing accident preventions regulations.

Safety Information

Keep your work area clean and well lit to prevent
accidents.
Don't use electric devices close to flammable
liquids or gasses or in wet or damp
environments.
If you fail to observe this, there is a danger of fire
or explosion.
Never leave the device running unattended.
Never use the device when you are tired or lack
concentration or if your reactions are impaired
due to consumption of alcohol or medication.
Lack of attention can lead to serious injury.
Keep the tools clean and in good working order
in order to be able to work better and safer.
Don't wear bulky clothing or jewellery.
Make sure you can stand stably and have shoes
that won't slip.