Glatz M4 Instructions De Montage page 5

Bodenhülse "M4"
Ground socket mod. "M4"
Douille de sol mod. "M4"
Piantone da interrare "M4"
___________________________________________________________
Adjustment of the ground socket
See the diagram below for the alignment of the ground socket. The direction of the
sunshade can also be easily adjusted later thanks to the adjustment slots in the
upright tube.
Setting example
a) Align the flange ring in a perfect horizontal
position
b) Loose covering up to 10 cm depth
permissible
c) Concrete layer BH PC 250
d) Mesh reinforcement K 188 top and bottom
e) PVC sheet as wetness barrier
f) Filter gravel 0/30 compacted
h) Hard foam collar to cover the thread
k) Pipes and cables for motor drive or
incorporated lighting
Foundation dimensions
Sunshade width x length x
2
up to 10 m 70 x
2
up to 15 m 80 x
2
up to 20 m 100 x
*from 1000m sea level 50 cm are recommended because of the frost depth.
Other possibilities of placing
 Mounting plate
 Mounting plate special for isolated grounds
 Movable base
10.2005-DEFI
Notch for alignment of free-arm sunshades. Align
the notch towards the middle of the seating area.
height
70 x 40 cm*
80 x 40 cm*
100 x 40 cm*
Sunshade width x length x height
2
up to 25 m 120 x
2
up to 30 m 125 x
2
up to 40 m 135 x
2
up to 50 m 150 x
120 x 40 cm*
125 x 40 cm*
135 x 40 cm*
150 x 40 cm*
5