Technical Data; Maintenance; Foreword; Checks And Inspections On Start-Up - Nilfisk Advance IV 022 Mode D'emploi

TECHNICAL DATA

Model IV 022
A [mm] 1,210
B [mm] 630
C [mm] 1,500
Weight [kg] 180
Specifications
Voltage [V]
Frequency [Hz]
IP protection Class
Insulation class
Dust class
Rated Power [W]
Suction power [W]
Airflow [L/sec]
Vacuum [kPa]
Sound pressure level at 1.5 m
(DBA) ISO3744
Container capacity [L]
Main filter area
Cable length [m]
Inlet [mm]
Length x Width x Height [mm]
Weight [kg]
32401105(1)2004-04 A
IV 022 EL S.IV 040 IV 040 EL S
1,210 1,210 1,210
630 630 630
1,500 1,500 1,500
187 197 205
IV 022 IV 040
3x200 - 415 3x200 - 3x600
50/60 50/60
55 55
F F
L, M, H L, M, H
2,200 4,000
267 588
84 100
15.7 20.8
67.9 73.2
100 100
17,600 17,600
9.5 9.5
50/70 50/70
1,210x630x1,500 1,210x630x1,500
180 197
INSTRUCTIONS FOR USE

MAINTENANCE

Foreword

ATTENTION!
All maintenance and cleaning operations
must be carried out when the vacuum is off
and disconnected from the mains socket.
The suction unit needs no particular maintenance or
lubrication.
Remember, however, that correct use and servicing are
essential if the safety and efficiency of the vacuum are to
be guaranteed.
To ensure regular and constant operation and to prevent
the warranty from becoming void, only ever use genuine
Nilfisk-Advance A/S spare parts when replacements are
needed.

Checks and inspections on start-up

The customer should proceed with the following
inspections to ensure that the vacuum has not been
damaged during transportation.

Before starting

Check that the mains voltage value corresponds to that for
which the machine is preset.
Check that all warning and danger plates are affixed and
legible.
Check that all protections are installed and efficient.

With the vacuum operating

Check that all the air seals are perfectly tight.
Check that all fixed protections are efficient.
Proceed with suction tests using the same materials used
during work.
This will ascertain whether all parts of the vacuum operate
correctly.
11