Important - MIRKA ROP2 Instructions D'utilisation

declare on our sole responsibility that the products 77 mm (3 in.) and 125 mm (5 in.) 10,000 rpm Two-handed Random Orbital Polisher
)see "Product Configuration/Specifications" table for particular model( to which this declaration relates are in conformity with the following
standard(s) or other normative document(s): EN ISO 15744:2008. Following the provisions of 89/392/EEC as amended by 91/368/EEC,
Jeppo 26.02.2016
Place and date of issue
Operator Instructions
Includes – Parts Page, Parts List, Polisher Spare Parts Kits,
Please Read and Comply, Proper Use of Tool, Work Stations,
Putting the Tool Into Service, Operating Instructions, Product
Configuration/Specifications Tables, Trouble Shooting Guide
Manufacturer/Supplier
KWH Mirka Ltd.
66850 Jeppo, Finland
Tel: + 358 20 760 2111
Fax: +358 20 760 2290
Recommended Airline
Size – Minimum
10 mm 3/8 in
Declaration of conformity
66850 Jeppo, Finland
93/44/EEC and 93/68/EEC Directives, and consolidating Directive 2006/42/EC.
Company
Recommended Maximum
Hose Length
8 meters
Mirka 10,000 rpm Two-handed
77 mm )3 in.( and 125 mm )5 in.(
Random Orbital Polisher
KWH Mirka Ltd.

Important

Read these instructions care-
fully before installing, operating,
servicing or repairing this tool.
Keep these instructions in a safe
accessible location.
Required Personal Safety Equipment
Safety Glasses
Safety Gloves
Maximum Working Pressure
Recommended Minimum
25 feet
28
Stefan Sjöberg, CEO
Breathing Masks
Ear Protection
Air Pressure
6.2 bar
NA
Original Instructions
90 psig
NA