Technical Specifications And Working Principle; Technical Data; Regulator Construction; Working Principle - REMEHA Celcia MC4 Manuel D'installation Et D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5 TECHNICAL SPECIFICATIONS AND WORKING PRINCIPLE

General
Dimensions (w x h x d)
Weight
Nominal supply voltage
Rated input
Safety requirements (household use)
EMC interference suppression (immunity)
EMC interference suppression (emission)
Maximum ambient temperature (storage and transport)
Maximum ambient temperature (operational situation)
Maximum relative humidity (non-condensation)
Inputs
Outside temperature sensor
System flow temperature sensor
Outputs
Pump output (live, make contact*)
Failure relay output (potential free switching contact)
OpenTherm connections
OpenTherm boiler connections
OpenTherm thermostat connection
LT.AL.REM.000.021
1
)
2
)
3
)

5.1 Technical data

mm
g
VAC / Hz
VA
-
-
-
°C
°C
%
-
NTC sensor (range 10 – 40 °C)
-
NTC sensor (range 10 – 100 °C)
-
switching power 230 VAC, 2A max.
-
switching power 230 VAC, 2A max.
quantity
quantity
table 06
Summary of technical data
*) Protect this output externally
) Maximum cable length = 100 M (2 x 10 Ω)
1
) Maximum cable length = 25 M (2 x 10 Ω)
2
) Maximum cable length = 50 M (2 x 5 Ω)
3

5.1.1 Regulator construction

1.
Cover
2.
Status LED
3.
LEDs for failure analysis
4.
Connection terminals
5.
Configuration button

5.1.2 Working principle

The Celcia MC4 is a regulator for the modulating control of
between 1 and 4 Remeha boilers in cascade, according to the
flow temperature demanded (via the OpenTherm input). With
the exception of the Remeha Selecta, all OpenTherm boilers
in the Remeha range can be controlled by the Celcia MC4.
Please contact our Sales Support department if you wish to
use the Celcia MC4 in combination with older boiler types or
the Gas 210 ECO and Gas 310 ECO. The Celcia MC4 has
a failure relay (the contact switches in the event of a power
failure and/or a failure in the Celcia MC4 or one of the boil-
ers) and also regulates the system pump. The (internal) boiler
pumps are controlled by the boiler control units.
31
Remeha Celcia MC 4
205 x 163 x 53
approx. 430
230 / 50
4
EN 60730-1
EN 61000-6-2
EN 61000-6-3
- 20 - 70
0 - 50
10 - 90
4
1

Publicité

Table des Matières
loading

Table des Matières