Publicité
PRE EQ PATCH JACKS (6)
Provided for connecting external effects devices into the signal path. To patch an effects device: connect the
Send jack to the input of the device. Connect the output of the device to the Return jack. High-quality,
shielded cables should be used for these connections.
LOW EQ SLIDER (7)
An active tone control (Shelving type, +15 dB) that varies the low frequency range.
Caution: Excessive low-frequency boost causes greater power consumption and increases possibility of
speaker damage.
LOW/MID EQ SLIDER (8)
An active tone control (Peak/notch, +12 dB) that varies the low/mid frequency range.
HIGH/MID EQ SLIDER (9)
An active tone control (Peak/notch, +12 dB) that varies the high/mid frequency range.
- HIGH EQ SLIDER (10)
An active tone control (Shelving type, +15 dB) that varies the high frequency range.
REVERB SEND (11)
Sets the level of the internal reverb (echo effect) for the channel and must be used in conjunction with the
Master Effects level.
CHANNEL TWO:
HIGH-Z INPUT (12)
A Y, phone jack input is provided with extremely "wide" dynamic range. This input will accept very high-level
signals generated by synthesized keyboard systems or very low signals generated by practice or home
keyboard units. This input is also for acoustic guitars and can be muted with a footswitch (optional).
GAIN SWITCH (13)
Boosts the gain of its channel by 12 dB. Depress to the "in" position to activate.
GAIN (14)
Controls the Channel Two 7," phone jack input level.
LOW EQ SLIDER (15)
An active tone control (Shelving type, +15 dB) that varies the low frequency range.
|
Caution: Excessive low-frequency boost causes greater power consumption and increases possibility of
speaker damage.
LOW/MID EQ SLIDER (16)
|
An active tone control (Peak/notch, +12 dB) that varies the low/mid frequency range.
HIGH/MID EQ SLIDER (17)
|
An active tone control (Peak/notch, +12 dB) that varies the high/mid frequency range.
HIGH EQ SLIDER (18)
An active tone control (Shelving type, +15 dB) that varies the high frequency range.
REVERB SEND (19)
Sets the level of the internal reverb (echo effect) for the channel and must be used in conjunction with the
Master Effects level.
CHANNEL THREE:
HIGH-Z INPUT (20)
A 7," phone jack input is provided with extremely "wide" dynamic range. This input will accept very high-level
signals generated by synthesized keyboard systems or very low signals generated by practice or home
keyboard units.
Publicité
