Sony DSX-A40UI Mode D'emploi page 19

Masquer les pouces Voir aussi pour DSX-A40UI:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

NO SUPRT (not supported)
 USB hub is not supported on this unit.
 The connected USB device is not supported.
For details on the compatibility of your USB
device, visit the support site on the back
cover.
NO USB
 USB is selected as source without a USB
device connected. A USB device or a USB
cable has been disconnected during
playback.
 Be sure to connect a USB device and USB
cable.
OVERLOAD
 USB device is overloaded.
 Disconnect the USB device, then change
the source by pressing OFF.
 Indicates that the USB device is out of
order, or an unsupported device is
connected.
READ
 The unit is reading all track and album
information on the USB device.
 Wait until reading is complete and
playback starts automatically. Depending
on the USB device structure, it may take
more than a minute.
STOP
 When repeat play is not set, playback of the
last track in album finished.
The music application in the iPod/iPhone is
terminated.
 Press PAUSE to start playback again.
If these solutions do not help improve the
situation, consult your nearest Sony dealer.
19
GB

Publicité

Chapitres

Table des Matières
loading

Table des Matières