Priority Instructions - Tractel PB Série Notice D'utilisation

In order to ensure the continuous improvement of its products, TRACTEL SOLUTIONS S.A.S reserves the right to
modify the specifications of the equipment described in this manual without notice.
This manual outlines all necessary instructions for the safe and the correct operation of the TOPAL clamps.
In the interests of safety and for the efficiency of the equipment, you must make yourself familiar with these
instructions and adhere to them before any use of the equipment.
The clamp can be used only by skilled and authorised personnel
 Never use this clamp to lift or transport persons.
Never exceed the working load limit WLL (see marking).

A minimum load of 5% of the WLL of the clamp must be respected for correct operation.

Never weld on the equipment or alter it.

 Never use the clamp for any use other than what it is designed for.
 In the interests of safety, never stand or walk under the load.
 When setting down a load, the object must be stable before opening the clamp.
 Regularly check the correct condition of the equipment (see "Compulsory Inspections and Checks" and
"Storage & Maintenance" paragraphs).
 Lifting operations can only be done when the environment is free of obstacles
 Only lift one load at the time
Only TRACTEL SOLUTIONS spare parts must be used.

DESCRIPTION AND USES OF THE EQUIPMENT
 Clamp for vertically lifting various loads with parallel sides
 Clamp fitted with either:
▫ a semi-automatic system which allows the load to be set down without human intervention
▫ automatic system which allows the load to be picked up and set down without human
intervention
The pads are hinged and are available in different versions, see table below

Pads
PVC or CR
"Standard"
PU
"PU"
Grained
"MG"
Spiked
"MO"
Stone, concrete, metal, etc.
4
Wood, plastic, etc.
5
Rubber, foam, cardboard, etc.
6
M 6110 M
rev 14 – 05/2021
English

PRIORITY INSTRUCTIONS

Abrasive
Not recommended
 pad wear
Non-
marking
Marking
GB
Load
Fragile
Not recommended 
scratches on the load
Hard 4 Medium 5 Soft 6
Page 13/51
www.tractel.com