Cooper Lighting Solutions Metalux SVP Serie Directives D'installation page 4

Installation Instruction Supplement - Metalux Luminaire with Integrated Sensor
Cooper Lighting Solutions Integrated Sensor System Series Features - SVPD1, SVPD2, SVPD3, SVP3
SVPD1 Coverage Pattern (not to scale)
Top View
C L
Coverage
4m
[12 ft.]
0m
[0 ft.]
4m
[12 ft.]
Major Motion
SVPD2 Coverage Pattern (not to scale)
Top View
9.1m
C L
[30 ft.]
6.1m
[20 ft.]
4.5m
[15 ft.]
3m
[10 ft.]
1.5m
[5 ft.]
0
1.5m
[5 ft.]
3m
[10 ft.]
4.5m
[15 ft.]
6.1m
[20 ft.]
9.1m
[30 ft.]
SVPD3, SVP3 Coverage Pattern (not to scale)
Side View
0
6.1m
[20 ft.]
9.1m
[30 ft.]
12.2m 9.1m
[40 ft.] [30 ft.] [20 ft.]
Notes: (1) The coverage pattern shown above depicts the area below the luminaire where the integrated sensor system can detect occupancy.
the sensor. Mounting height should not exceed coverage shown.
(3)
Default Settings - SVPD1, SVPD2, SVPD3, SVP3
Occupancy Detection
Default Occupancy Time Out
Occupancy Sensitivity
Energy Saver Scene
Fade Up Time
Fade Down Time
Default Daylight Harvesting Level
Default Unoccupied Light Level
Notes: SVP3 series excludes Daylight Harvesting.
(1)
End of SVP series integrated sensor system information
4
Side View
3.3m
[10 ft.]
0m
[0 ft.]
4m 0m 4m
[12 ft.] [0 ft.] [12 ft.]
Recomended Mounting Height 8–12 ft.
Side View
0
2.4m
[8 ft.]
0
6.1m 3m 3m
[10 ft.] [10 ft.]
Exceeding these spacing/height guidelines will result in reduced integrated sensor performance.
(4)
Auto-on, Active
20 minutes
High
100 % - Occupied Scene
32% per second using "Raise"
24% per second using "Lower"
Consult luminaire specification sheet(s)
(1)
Off
6.1m 3m 3m
0
[20 ft.] [10 ft.] [10 ft.]
4.5m 1.5m 1.5m
[15 ft.] [5 ft.] [5 ft.]
6.1m 9.1m 12.2m
[20 ft.] [30 ft.] [40 ft.]
Installation Instruction Supplement –
ADF142495 www.cooperlighting.com
6.1m
[20 ft.]
4.5m 9.1m
[15 ft.] [30 ft.]
(2) Spacing between fixtures should not exceed the coverage pattern of