Publicité
1. Verify that the power cord is disconnected from the outlet (Fig. 1).
2. In order to prepare your vacuum for dry vacuuming, make sure the reusable cloth filter completely
covers the filter cage against the powerhead. Your wet/dry vacuum comes with the reusable cloth
filter pre-installed. For installation instructions, see page 15 (Fig. 2 & 3).
3. Place the powerhead back on the collection tank and secure it in place using the latches (Fig. 4).
OPERATING INSTRUCTIONS: DRY VACUUMING
4. Insert the larger end of the hose into the vacuum port on the tank.
5. Push the required accessory onto the free end of the hose or the extension wand (Fig. 5).
6. Verify that the switch is in the 'O' OFF position before plugging the power cord into the power outlet.
Plug the power cord into the outlet (Fig. 6 & 7).
7. Turn the motor on by flipping the switch to the 'I' ON position and begin vacuuming (Fig. 8).
8. Once you have completed vacuuming, flip the switch to the 'O' OFF position and unplug the power
cord from the outlet.
O = OFF
I = ON
DO NOT USE THE REUSABLE CLOTH FILTER FOR LIQUID VACUUMING.
11
Publicité
