Publicité
ASSEMBLY INSTRUCTIONS
REMOTE CONTROL BATTERY INSTALLATION/REPLACEMENT INSTRUCTIONS
A. Remove battery door by sliding downward in direction of arrow (Fig. 8).
B. Insert 2 AAA batteries into the remote following the directional guides
in the recessed slots. Batteries are included.
C. Replace battery door by sliding upward opposite of arrow direction
until door snaps in place.
NOTE: DO NOT MIX OLD AND NEW BATTERIES. DO NOT MIX ALKALINE,
STANDARD (CARBON-ZINC) OR RECHARGEABLE (NICKEL-CADMIUM) BATTERIES.
SEE RECYCLERS IN YOUR AREA FOR PROPER DISPOSAL OF BATTERIES.
HYF260 SERIES FAN OPERATION
FAN OPERATION
FAN OPERATION
ON/OFF
To turn fan on, press the Power button ( ) located
on the bottom center of the control panel.
SPEED CONTROL
The fan will automatically start on "Sleep" speed when
initially turned on. To adjust the speed up or down, press
the Fan Speed button ( ) repeatedly to increase level.
OSCILLATION
To activate the Oscillation feature, press the Oscillation button
( ) once. Press the Oscillation button again to turn the
Oscillation feature off.
TIMER
Choose from 1, 2, 4, or 8 hour settings by performing
the following function:
• 1 hour: Press the Timer button ( ) once.
• 2 hours: Press the Timer button twice.
• 4 hours: Press the Timer button a third time.
• 8 hours: Press the Timer button a fourth time.
Press the Timer button a fifth time to turn the Timer feature off.
AUTO DIM LIGHT FEATURE
Control panel light automatically dims to 50% brightness after 15 seconds and
resumes to 100% brightness when settings are changed.
4
HYF260 SERIES REMOTE CONTROL OPERATION
ON/OFF
Press the Power button ( ) once to turn the fan on. Press
Fig. 8
the Power button a second time to turn the fan off.
SPEED CONTROL
The fan will automatically start on "Sleep" speed when
initially turned on. To adjust the speed up or down, press
the Fan Speed button ( ) repeatedly to increase level.
OSCILLATION
To activate the Oscillation feature, press the Oscillation button
( ) once. Press the Oscillation button again to turn the Oscillation
feature off.
REMOTE CONTROL STORAGE
When it is not in use, the remote control may be stored in the recessed
area located behind the controls (Fig. 9).
HYF290 SERIES FAN OPERATION
ON/OFF
To turn fan on, press the Power button ( ) located on the
bottom center of the control panel.
SPEED CONTROL
The fan will automatically start on "Sleep" speed when initially
Model HYF260 SERIES
turned on. To adjust the speed up or down, press the Fan Speed
button ( ) repeatedly to increase level.
OSCILLATION
To activate the Oscillation feature, press the Oscillation
button ( ) once. Press the Oscillation button again to turn
the Oscillation feature off.
TIMER
Choose from 1, 2, 4, or 8 hour settings by performing
the following function:
• 1 hour: Press the Timer button ( ) once.
Model HYF260 SERIES
• 2 hours: Press the Timer button twice.
in CANADA ONLY
• 4 hours: Press the Timer button a third time.
• 8 hours: Press the Timer button a fourth time.
Press the Timer button a fifth time to turn the Timer feature off.
Fig. 9
Power Cool
Cool
Refresh
Relax
White Noise
Calm
Whisper
Sleep
1
2
4
8
Model HYF290 SERIES
1
2
4
8
Model HY290 SERIES
in CANADA ONLY
5
Publicité
