Publicité
5.3 AC APPLICATIONS
OUTPUT
SURCHARGE
OVERLOAD
PRET A UTILISER
LOW OIL
HUILE BAS
1
1.
Start engine and make sure output indicator light (READY TO USE) is on.
2.
Confirm all electrical appliances are switched off, and connect the
appliance plugs to the generator receptacle.
3.
Turn on the appliances.
4.
Turn EcoMode ON.
NOTE
Confirm all electrical appliances are in good working condition before
connecting them to the generator. If an electrical appliance becomes
abnormal, sluggish, or stops suddenly, shut off the generator engine
immediately, and disconnect the appliance.
Most appliances require more than their rated wattage upon startup.
For continuous operation do not exceed the rated output of the
generator.
The grounding system is not connected to the AC neutral wire.
Neutral floating for AC system.
2
3
22
4
Publicité
