3. PRE-OPERATION CHECK
Set the generator on a level surface and the power switch to OFF.
3.1 CHECK THE OIL LEVEL
Oil Transfer Tool
1.
Unscrew and remove the oil maintenance panel.
2.
Unscrew the oil dipstick and wipe it off.
3.
Check the oil level by reinserting the dipstick without rethreading it.
Remove the dipstick and examine the oil level. If the oil level is at or below
the minimum oil level, refill the oil to the maximum oil level mark.
4.
Reinsert the dipstick and tighten securely. Replace the oil maintenance
panel and screws.
NOTE
SAE 10W-30 or SAE Synthetic 5W-30 is recommended for general use.
Use of synthetic oil does not change maintenance intervals.
Oil Capacity: 18 fl. oz. / 0.55 L
DO NOT OVERFILL.
Oil Cap and Dipstick
10
Max Fill Level
Oil Capacity
18 . Oz. / 0.55L