Publicité
EN
Safety instructions
• Position on a flat, stable surface.
• A service agent/qualified technician should carry out
installation and any repairs if required. Do not remove any
components on this product.
• Consult Local and National Standards to comply with the
following:
- Health and Safety at Work Legislation
- BS EN Codes of practice
- Fire Precautions
- Wiring Regulations
- Building Regulations
• During and after use, the unit is still hot.
Never touch the surface to avoid scalding.
• DO NOT immerse the appliance in water.
• DO NOT use jet/pressure washers to clean the appliance.
• DO NOT move or carry the appliance when it is switched on.
• Do NOT allow the power cord to come into contact with the
hot surface of the appliance.
• Not suitable for outdoor use.
• Intended to use in household and similar applications.
• Always switch off and disconnect the power supply to the
appliance when not in use and before cleaning.
• Keep all packaging away from children. Dispose of the
packaging in accordance to the regulations of local authorities.
• If the power cord is damaged, it must be replaced by a
BUFFALO agent or a recommended qualified technician in
order to avoid a hazard.
2
HX988_ML_A5_v1_20240726.indb 2
2024/7/26 14:52:46
Publicité
